Arch Stairs/ru

Пространство

Инструменты панелирования

Архитектурный верстак "Arch"

Описание

Смотрите статью о лестницах на википедии для определения значения различных терминов, используемых при описании частей лестницы.

Опции

Применение

Complex stairs based on a selection of lines and wired as shown on the left.
In red the wires used for the landings at Z=1500mm, Z=3000mm and Z=4500mm.
In black the lines connecting them used for the flights.

Свойства

An Arch Stairs object shares the common properties and behaviors of all Arch Components.

Данные

Segment and Parts

• ДанныеAbs Top (Vector): (read-only) The absolute top level the stairs lead to.
• ДанныеLast Segment (Link): Last segment (flight or landing) of an Arch Stairs connecting to this segment. The start level of the stairs will be the end level of this last segment.
• ДанныеOutline Left (VectorList): The left outline of the stairs (read-only).
• ДанныеOutline Left All (VectorList): The left outline of all segments of the stairs (read-only).
• ДанныеOutline Right (VectorList): The right outline of the stairs (read-only).
• ДанныеOutline Right All (VectorList): The right outline of all segments of the stairs (read-only).
• ДанныеRailing Height Left (Length): Height of the left railing of the stairs or landing.
• ДанныеRailing Height Right (Length): Height of the right railing of the stairs or landing.
• ДанныеRailing Left (LinkHidden): The left railing object. introduced in 0.20: Property type updated from String to LinkHidden.
• ДанныеRailing Offset Left (Length): Offset of the left railing from the edge of the stairs or landing.
• ДанныеRailing Offset Right (Length): Offset of the right railing from the edge of the stairs or landing.
• ДанныеRailing Right (LinkHidden): The right railing object. introduced in 0.20: Property type updated from String to LinkHidden.

Stairs (Лестница)

• ДанныеAlign (Enumeration): The alignment of the stairs on the baseline. Only used if a baseline is defined. Can be Left, Right or Center.
• ДанныеHeight (Length): The total height of the stairs. Only used if no baseline is defined, or if the baseline is horizontal. Ignored if ДанныеRiser Height Enforce is non-zero.
• ДанныеLength (Length): The total length of the stairs if no baseline is defined. Ignored if ДанныеTread Depth Enforce is non-zero.
• ДанныеWidth (Length): The width of the stairs.
• ДанныеWidth of Landing (FloatList): If the ДанныеNumber Of Steps is 1, the stairs object acts as a landing. When this is the case and the baseline is multi-segment, the width of the first segment of the landing follows the ДанныеWidth, and the widths of subsequent segments follow the list set here.

Steps (Ступени)

Structure

• ДанныеConnection Down Start Stairs (Enumeration): The type of connection between the lower floor slab and the start of the stairs. Can be HorizontalCut, VerticalCut or HorizontalVerticalCut.
• ДанныеConnection End Stairs Up (Enumeration): The type of connection between the end of the stairs and the upper floor slab. Can be toFlightThickness or toSlabThickness.
• ДанныеDown Slab Thickness (Length): The thickness of the lower floor slab.
• ДанныеFlight (Enumeration): The direction of the flight after the landing. Can be Straight, HalfTurnLeft or HalfTurnRight. The ДанныеLandings property must be set to At center.
• ДанныеLandings (Enumeration): The type of landings. Can be None or At center (At each corner not implemented yet).
• ДанныеStringer Overlap (Length): The overlap of the stringers above the bottom of the treads.
• ДанныеStringer Width (Length): The width of the stringers.
• ДанныеStructure (Enumeration): The structure type of the stairs. Can be None, Massive, One stringer or Two stringers. For the last two options, the ДанныеStringer Width and ДанныеTread Thickness properties must have non-zero values.
• ДанныеStructure Offset (Length): The offset between the border of the stairs and the structure.
• ДанныеStructure Thickness (Length): The thickness of the structure.
• ДанныеUp Slab Thickness (Length): The thickness of the upper floor slab.
• ДанныеWinders (Enumeration): The type of winders. Not implemented.

Ограничения

Программирование

См. так же: Arch API и Основы составления скриптов в FreeCAD.

The Stairs tool can be used in macros and from the Python console by using the following function:

Stairs = makeStairs(baseobj=None, length=None, width=None, height=None, steps=None, name="Stairs")

• Creates a Stairs object from the given baseobj.
• If baseobj is not given, it will use length, width, height, and steps, to build a solid object.

Пример:

import Arch

Stairs = Arch.makeStairs(length=5000, width=1200, height=3000, steps=14)

Пространство

Инструменты панелирования

Архитектурный верстак "Arch"

BIM

• 2D drafting: Sketch, Line, Polyline, Circle, Arc, Arc by 3 points, Fillet, Ellipse, Polygon, Rectangle, B-spline, Bézier curve, Cubic Bézier curve, Point

---

• 3D/BIM: Project, Site, Building, Level, Space, Wall, Curtain Wall, Column, Beam, Slab, Door, Window, Pipe, Pipe Connector, Stairs, Roof, Panel, Frame, Fence, Truss, Equipment
  • Reinforcement tools: Custom Rebar, Straight Rebar, U-Shape Rebar, L-Shape Rebar, Stirrup, Bent-Shape Rebar, Helical Rebar, Column Reinforcement, Beam Reinforcement, Slab Reinforcement, Footing Reinforcement
  • Generic 3D tools: Profile, Box, Shape builder..., Facebinder, Objects library, Component, External reference

---

• Annotation: Text, Shape from text, Aligned dimension, Horizontal dimension, Vertical dimension, Leader, Label, Axis, Axes System, Grid, Section Plane, Hatch, Page, View, Shape-based view

---

• Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid, Working Plane Top, Working Plane Front, Working Plane Side

---

• Modify: Move, Copy, Rotate, Clone, Create simple copy, Make compound, Offset, 2D Offset..., Trimex, Join, Split, Scale, Stretch, Draft to sketch, Upgrade, Downgrade, Add component, Remove component, Array, Path array, Polar array, Point array, Cut with plane, Mirror, Extrude..., Difference, Union, Intersection

---

• Manage: BIM Setup..., Views manager, Manage project..., Manage doors and windows..., Manage IFC elements..., Manage IFC quantities..., Manage IFC properties..., Manage classification..., Manage layers..., Material, Schedule, Preflight checks..., Annotation styles...

---

• Utils: Toggle bottom panels, Move to Trash, Working Plane View, Select group, Set slope, Create working plane proxy, Add to construction group, Split Mesh, Mesh to Shape, Select non-manifold meshes, Remove Shape from Arch, Close Holes, Merge Walls, Check, Toggle IFC Brep flag, Toggle subcomponents, Survey, IFC Diff, IFC explorer, Create IFC spreadsheet..., Image plane, Unclone, Rewire, Glue, Reextrude
  • Panel tools: Panel, Panel Cut, Panel Sheet, Nest
  • Structure tools: Structure, Structural System, Multiple Structures
  • IFC tools: IFC Diff..., IFC Expand, Make IFC project, IfcOpenShell update
  • Nudge: Nudge Switch, Nudge Up, Nudge Down, Nudge Left, Nudge Right, Nudge Rotate Left, Nudge Rotate Right, Nudge Extend, Nudge Shrink

---

• Additional: Preferences, Fine tuning, Import Export Preferences, IFC, DAE, OBJ, JSON, 3DS, SHP

Документация пользователя

• Начинающим
• Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
• Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования

---

• Помощь: Учебники, Видео учебники
• Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Менеджер дополнений, Внешние верстаки, Cкрипты и макросы

---

• Hubs: Уголок пользователя, Уголок опытных пользователей, Уголок разработчиков